M/s Facor Power Limited, is installed with 100MW coal based thermal Captive Power Plant. The Plant is situated adjacent to the FACOR Charge Chrome Plant and is approximately 4 Kms from the Odisha PGCIL’s grid sub-station. The Plant has a 3 by 2 configuration, 3 Boilers and 2 Turbine Generators.
Design and Delivery
Major Equipment for this Plant has been sourced from a range of established manufacturers including Bharat Heavy Electricals Limited, Thyssenkrupp Industries India, ABB Limited and Thermax Limited, all well-known suppliers in the thermal power industry.
- 100 MW comprises of 2units of 50 MW each in Units are CPP
- Capacity: 100 MW (2 X 50 MW)
- Location: D.P Nagar, Randia, Bhadrak, 756135
- Source of Coal: MCL, Talcher
- Source of Water: Salandi River
- Operation & Maintenance: FPL’s own operation & maintenance (Fields Ops & maintenance staffs are outsourced)
- Installation / O & M: FPL’s own control room operation July-2011 onwards
Salient Features
- Primary Fuel: Thermal Coal
- Start-up Fuel: LDO/HSD
- Coal handling System: Primary and secondary crushers for reduction of ROM coal to 8mm.
- Water Source – DM water
- Steam turbine: Multistage, single cylinder, regenerative, condensing steam turbine
- CAPACITY: 2×50 MW
- RAW MATERIAL: Coal, Water, Oil
- TECHNOLOGY: Coal based Thermal Power Plant with cold cyclone Circulating Fluidized Bed Combustion (CFBC) boiler
Boiler
- Manufacturer – THYSSEN KRUPP INDUSTRIES INDIA PVT. LTD.
- Type- Cold cyclone, CFBC, Single Drum, Natural circulation
- Capacity – 3 x 155 TPH (BMCR), Operating SH Pr. 100(kg/cm2). & temperature 540 deg C
- ASH Evacuation- Dry ash evacuation through pneumatic conveying system
Turbine
- Manufacturer – BHEL, HYDERABAD
- Type – Multistage, single shaft, single cylinder, regenerative type Condensing Steam Turbine
- Capacity – 2 x 50 MW (normal); 5000 RPM
Generator
- Manufacturer – BHEL, HYDERABAD
- Type – 2 Pole generator, Output voltage-11kv. Synchronization done at 132kv
- Capacity – 65.625 MVA (normal)